The LiDAR unit, specifically designed for the RS 3 Pro and RS 4 Pro gimbal stabilisers, enhances autofocus capabilities with its expanded ranging points, fast refresh rate, and wide detection area. It supports both wide-angle and telephoto lens configurations and features a built-in camera for accurate focus.
The Focus Pro Grip, equipped with a touchscreen display and various buttons, allows for intuitive control over camera and lens operations. It can be easily attached to your gimbal configuration using the built-in NATO clamp, and its battery lasts up to 2.5 hours.
The DJI Focus Pro Hand Unit, with its long-range control and tactile feedback for precise focusing, complements the Focus Pro Motor and gimbal stabiliser setup. It also offers Bluetooth recording control and a convenient touchscreen display for monitoring settings. Power for the hand unit is provided by an NP-F550 battery.
Specifications
| DJI Focus Pro LiDAR | |
| General | |
| Compatibility | DJI RS 3 Pro / RS 4 Pro / Focus Pro Grip |
| Resolution | 1920 x 1440 |
| Frame Rate | 30 fps |
| Field of View | 57.4° (Horizontal) 44.6° (Vertical)<br:70.1° (Diagonal) |
| Range | 1.6 to 65.6′ / 0.5 to 20 m |
| Inputs / Outputs | |
| USB I/O | 2 x USB-C Female Input |
| Power | |
| Power Source | USB |
| DC Input Power | 6.6 to 17.2 VDC |
| Power Consumption | 6.3 W (Typical) 6.8 W (Maximum) |
| Environmental | |
| Environmental Protection | No |
| Operating Temperature | -4 to 113°F / -20 to 45°C |
| Physical | |
| Mounting | 1x Cold Shoe 1x 1/4″-20 Thread |
| Colour | Black |
| Cable Length | 11.8″ / 30 cm |
| Dimensions | 2.7 x 2.2 x 1″ / 68 x 57 x 25 mm |
| Weight | 4.9 oz / 140 g |
| DJI Focus Pro Grip | |
| General | |
| Compatibility | DJI Focus Pro Motor / RS 4 Pro Gimbal Stabiliser / RS 3 Pro Gimbal Stabiliser |
| Display | |
| Display Size | 1.8″ |
| Touchscreen | Yes |
| Inputs / Outputs | |
| USB I/O | 4 x USB-C Female Input |
| Wireless | |
| Wireless | 2.4 GHz Radio/RF / Bluetooth *Built-In |
| Power | |
| Power Source | Battery |
| Battery Type | 1x Internal Rechargeable |
| DC Input Power | 6.6 to 8.4 VDC |
| Environmental | |
| Operating Temperature | -4 to 113°F / -20 to 45°C |
| Physical | |
| Mounting | 1x NATO Clamp 2x NATO Rail 1x M4 Screw 1x 1/4″-20 Screw |
| Colour | Black |
| Cable Length | 15.7″ / 40 cm |
| Dimensions | 6.4 x 2.9 x 2.3″ / 162 x 73 x 59 mm |
| Weight | 17 oz / 482 g |
| DJI Focus Pro Motor | |
| General | |
| Compatibility | DJI RS 3 Gimbal Stabiliser / RS 4 Gimbal Stabiliser / RS 3 Pro Gimbal Stabiliser / RS 4 Pro Gimbal Stabiliser / Focus Pro Grip / Focus Pro Hand Unit / Ronin 4D Flex |
| Max Transmission Distance | 524.9′ / 160 m |
| Gear Specs | 30 Teeth, 0.8 MOD |
| Max Torque | 0.6 Nm |
| Speed | 300 rpm (Max) |
| Inputs / Outputs | |
| USB I/O | 1 x USB-C Female Input |
| Wireless | |
| Wireless | 2.4 GHz Radio/RF *Built-In |
| Power | |
| Power Source | USB |
| DC Input Power | 6.6 to 17.2 VDC |
| Environmental | |
| Certifications | COE, FCC |
| Operating Temperature | -4 to 113°F / -20 to 45°C |
| Physical | |
| Mounting | 1x 15mm Rod 1x 1/4″-20 Screw 1x Rod Mount Kit |
| Cable Length | 11.8″ / 30 cm |
| Dimensions | 3.9 x 2.4 x 1.3″ / 100 x 61 x 34 mm |
| Weight | 4.3 oz / 123 g |
| DJI Focus Pro Hand Unit | |
| General | |
| Compatibility | DJI RS 4 Pro Gimbal Stabiliser / RS 3 Pro Gimbal Stabiliser |
| Max Transmission Distance | 328.1 to 524.9′ / 100 to 150 m |
| Display | |
| Display Size | 1.09″ |
| Touchscreen | Yes |
| Wireless | |
| Wireless | Bluetooth / 2.4 GHz Radio/RF *Built-In |
| Power | |
| Power Source | Battery |
| Battery Type | 1x Sony L-Series |
| DC Input Power | 6.3 to 8.4 VDC |
| Power Consumption | 0.83 W (Typical) |
| Environmental | |
| Certifications | COE, FCC |
| Operating Temperature | -4 to 113°F / -20 to 45°C |
| Physical | |
| Cable Length | 19.7″ / 50 cm |
| Dimensions | 5 x 3.4 x 3.4″ / 128 x 87 x 87 mm |
| Weight | 19.6 oz / 555 g |